
Ferrari has introduced a revised floor configuration for the 2026 Las Vegas Grand Prix, joining six other Formula 1 teams in bringing technical changes to the Nevada street circuit. According to the official FIA technical update document, seven constructors have declared a combined 13 modifications, with Mercedes introducing the largest package of four changes, followed by Racing Bulls with three and McLaren with two.
The Las Vegas Grand Prix is the 21st round of the 2026 Formula 1 World Championship, with only three races remaining in the season. Despite most teams having already shifted much of their technical attention towards 2027, the unusual characteristics of the Las Vegas Strip Circuit have encouraged several manufacturers to introduce specific aerodynamic configurations.
Following a Brazilian Grand Prix weekend in which McLaren was the only team to declare technical updates, Mercedes, McLaren, Ferrari, Red Bull, Racing Bulls, Haas and Audi have all submitted modifications for Las Vegas.
The circuit’s exceptionally long straights, high speeds and generally low temperatures demand a careful compromise between aerodynamic drag, downforce and cooling. Consequently, many of the declared changes are not necessarily general performance upgrades intended to work at every circuit. Instead, they represent targeted adjustments to the specific requirements of the American venue.
That distinction is particularly important for Ferrari, which has already redirected its development priorities towards the 2027 Formula 1 car while continuing to adapt the SF-26 to the demands of individual Grands Prix.
2026 Las Vegas GP F1 upgrades: Seven teams declare 13 technical changes
Mercedes has submitted the largest number of modifications, with four changes primarily focused on reducing aerodynamic resistance and optimising cooling. Racing Bulls has introduced three alterations affecting the floor, front wing and rear corner, all aimed at reducing aerodynamic load and improving lap-time efficiency at Las Vegas.
Ferrari and Audi have also prepared circuit-specific aerodynamic solutions, while Haas is experimenting with an alternative configuration of its rear wing Straight Mode mechanism.
McLaren and Red Bull have taken somewhat different approaches. The Woking-based team is continuing its floor development programme with two performance-focused modifications, following the substantial package introduced at Interlagos. Red Bull, meanwhile, has altered the position and geometry of the front wing dive-plane to improve airflow stability.
The full list of officially declared changes is detailed below, including the components affected, the stated development objectives and the technical differences identified in the FIA documentation.
Ferrari: Revised SF-26 floor board targets lower drag
Ferrari’s declared technical change for the Las Vegas Grand Prix concerns the front section of the SF-26 floor. The Scuderia has optimised the aerodynamic elements of the floor board, adopting a configuration with a single vertical element.
The primary objective is to reduce aerodynamic drag, favouring a more efficient configuration for the long straights of the Las Vegas circuit. The adjustment also reduces downforce, but Ferrari considers this an acceptable compromise given the demands of the venue.
Rather than representing a general aerodynamic development intended to improve performance at every Grand Prix, the modification is a targeted circuit-specific solution. Ferrari is adjusting a particularly sensitive area of the car to achieve a different balance between aerodynamic load and resistance, with an emphasis on reducing the latter.
This approach is consistent with the aerodynamic efficiency challenges facing Ferrari at Las Vegas, where straight-line performance is an important consideration.
Ferrari’s official FIA technical update
| Component | Reason | Differences | Description |
|---|---|---|---|
| Floor Board | Circuit-specific – Drag reduction | Optimisation of the front floor elements, adopting a single vertical element. | The modifications have been designed to adapt the car to the characteristics of the Las Vegas circuit and its aerodynamic efficiency requirements. The primary objective is to reduce drag while accepting a corresponding reduction in downforce, achieving a compromise suited to the circuit. |
Mercedes: Four technical updates focus on drag reduction and cooling
Mercedes has brought the largest package of declared updates to Las Vegas, consisting of four modifications. Unlike McLaren’s developments, the majority of these changes are directly related to the characteristics of the Nevada circuit, where reducing aerodynamic resistance can provide a significant advantage on the long straights.
The most substantial modification concerns the rear wing, from which several aerodynamic appendages have been removed. This reduces the overall camber of the wing assembly and, consequently, both the downforce generated and the associated drag. The aim is to achieve a more favourable relationship between aerodynamic load and resistance for Las Vegas.
A similar approach has been adopted for the rear support of the rear-view mirror, which has been reduced in size to decrease local aerodynamic load and drag. Mercedes has also modified the position and extent of aerodynamic appendages around the rear wheels, optimising their contribution according to the circuit’s requirements.
The fourth change concerns the engine cover, which now features a narrower rear cooling outlet. This configuration is possible because the lower ambient temperatures expected in Las Vegas reduce the cooling requirements compared with hotter Grands Prix, allowing the team to use a less open bodywork arrangement.
These modifications underline the importance of finding the right aerodynamic compromise at Las Vegas, where Ferrari and Mercedes face competing performance and efficiency demands.
Mercedes’ official FIA technical updates
| Component | Reason | Differences | Description |
|---|---|---|---|
| Rear Wing | Circuit-specific – Drag reduction | Removal of several aerodynamic appendages from the rear wing. | Removing the appendages reduces the overall camber of the wing assembly, decreasing downforce and drag to achieve a relationship suited to the characteristics of the Las Vegas circuit. |
| Front Bodywork | Circuit-specific – Drag reduction | Reduced size of the rear-view mirror’s rear support. | The modified mirror support reduces local camber and aerodynamic load, decreasing drag to achieve a more appropriate downforce-to-drag relationship for Las Vegas. |
| Rear Corner | Performance – Local aerodynamic load | Optimisation of the position and extent of the rear aerodynamic appendages. | The position and extent of the rear aerodynamic appendages have been optimised according to local downforce requirements, reducing aerodynamic load and drag to achieve a compromise suited to Las Vegas. |
| Engine Cover | Cooling management | Narrower rear bodywork outlet opening. | The narrower rear outlet allows a different cooling configuration, appropriate for the lower heat-rejection requirements expected at the Las Vegas circuit. |
McLaren: Two further floor developments after Brazilian GP upgrade
McLaren is continuing its aerodynamic development programme with two additional modifications to the floor, just two weeks after introducing a substantial update package at the Brazilian Grand Prix.
Unlike the circuit-specific aerodynamic adjustments presented by several other teams, McLaren’s declared changes are intended to improve overall performance by managing airflow more effectively.
The first development involves a new vertical floor element, introduced alongside changes to the outer floor edge and diffuser. The objective is to improve aerodynamic flow conditioning and increase the downforce generated by the underside of the car.
The second update concerns the aerodynamic elements towards the rear of the floor. This is a smaller modification intended to influence airflow travelling towards the rear corners of the car and the diffuser, improving overall aerodynamic efficiency.
McLaren’s official FIA technical updates
| Component | Reason | Differences | Description |
|---|---|---|---|
| Floor Furniture | Performance – Aerodynamic flow conditioning | New vertical floor element and modified floor edge. | A new vertical floor element has been designed together with modifications to the floor edge and diffuser, with the objective of improving aerodynamic flow conditioning and increasing generated downforce. |
| Floor Furniture | Performance – Aerodynamic flow conditioning | Changes to the aerodynamic elements at the rear of the floor. | A small modification to the rear floor elements influences airflow towards the rear corners of the car and the diffuser, aiming to improve overall aerodynamic efficiency. |
Red Bull: Front wing dive-plane repositioned to improve airflow stability
Red Bull has introduced a localised modification to its front wing, specifically targeting the dive-plane, the small aerodynamic appendage attached to the wing endplate.
The component has been lowered and its chord length reduced, changing both its position and geometry.
According to the information submitted by Red Bull to the FIA, the modification is intended to better preserve airflow stability around the junction between the endplate and the horizontal wing surface, as well as over downstream surfaces.
Rather than representing a complete redesign of the front wing, the change is a local optimisation aimed at improving airflow quality and the car’s overall aerodynamic behaviour.
Red Bull’s official FIA technical update
| Component | Reason | Differences | Description |
|---|---|---|---|
| Front Wing Endplate | Performance – Local aerodynamic load | Repositioning of the dive-plane on the front wing endplate. | To better preserve aerodynamic flow stability around the junction between the endplate and the horizontal front wing surface, as well as on downstream surfaces, the dive-plane has been lowered and its chord length reduced. |
Racing Bulls: Three aerodynamic changes for Las Vegas GP
Racing Bulls has introduced a package of three aerodynamic modifications specifically developed for the Las Vegas circuit, affecting the floor, rear wheel area and front wing.
The common objective is to reduce aerodynamic load and improve overall efficiency, seeking a compromise better suited to the characteristics of the American street circuit.
The first update concerns the floor board, where the chord length of its aerodynamic elements has been reduced. According to the team, the resulting reduction in downforce should improve aerodynamic efficiency and lap time at Las Vegas.
The second modification affects the rear wheel area, where Racing Bulls has adopted a different configuration for the aerodynamic appendages associated with the brake drums. Once again, the objective is to reduce downforce efficiently, with a net performance benefit expected at this particular circuit.
The final change concerns the front wing, featuring a flap with a shorter chord and revised angle of incidence. This configuration reduces the downforce generated at the front of the car while increasing the available range of aerodynamic balance adjustments.
Racing Bulls’ official FIA technical updates
| Component | Reason | Differences | Description |
|---|---|---|---|
| Floor Board | Circuit-specific – Drag reduction | Reduced chord length of the floor board elements. | The reduction in downforce generated by the floor board is intended to improve the car’s overall aerodynamic efficiency and lap time at this specific circuit. |
| Rear Corner | Circuit-specific – Drag reduction | Changes to the aerodynamic appendages around the rear brake drums. | An alternative configuration for the aerodynamic appendages around the rear brake drums allows an efficient reduction in downforce, with a net performance benefit expected for this circuit. |
| Front Wing | Circuit-specific – Increased aerodynamic balance adjustment range | Flap featuring reduced chord length and modified angle of incidence. | A low-downforce front wing flap is available for this circuit, with changes to its chord and incidence designed to reduce front wing downforce and increase the range of aerodynamic balance adjustments. |
Haas: Alternative rear wing Straight Mode configuration under evaluation
Haas has introduced a modification to its rear wing to evaluate a different configuration of the Straight Mode mechanism, the system used to reduce aerodynamic resistance on straights.
The American team has revised the arrangement of the rear wing elements, introducing additional small adjustments needed to accommodate the new configuration.
The stated objective is to experiment with an alternative method of activating the rear wing’s Straight Mode system and evaluate how it functions.
Haas’ official FIA technical update
| Component | Reason | Differences | Description |
|---|---|---|---|
| Rear Wing | Performance – Drag reduction | Revised rear wing configuration associated with the Straight Mode mechanism. | The new configuration has been designed to evaluate an alternative method of activating rear wing Straight Mode, with additional small modifications required to accommodate the different system arrangement. |
Audi: Revised rear brake duct deflector for aerodynamic efficiency
Audi has introduced a circuit-specific modification to the rear wheel area of its Formula 1 car, changing the geometry of the deflector associated with the rear brake duct.
According to the FIA documentation, the new configuration has been developed to adapt local aerodynamic behaviour to the particular efficiency requirements of the Las Vegas circuit.
Audi’s official FIA technical update
| Component | Reason | Differences | Description |
|---|---|---|---|
| Rear Corner | Circuit-specific – Drag reduction | Updated rear brake duct deflector geometry. | The geometry of the rear brake duct deflector has been modified to meet the specific aerodynamic efficiency requirements of the Las Vegas circuit. |
Williams, Aston Martin, Alpine and Cadillac: No declared technical updates
Four teams have not declared any technical changes for the 2026 Las Vegas Grand Prix:
- Williams: No updates.
- Aston Martin: No updates.
- Alpine: No updates.
- Cadillac: No updates.
Why Las Vegas requires a different aerodynamic approach
The FIA’s technical declarations highlight two different approaches among the teams introducing changes at Las Vegas.
Ferrari, Mercedes, Racing Bulls and Audi have focused heavily on configurations adapted to the circuit’s specific aerodynamic requirements, particularly the need to reduce drag on long straights. Haas is examining an alternative Straight Mode mechanism, while Red Bull has concentrated on improving airflow stability through a localised front wing modification.
McLaren, meanwhile, continues to pursue broader aerodynamic performance improvements through its floor developments, rather than limiting its changes to a lower-drag configuration for Las Vegas.
The distinction is particularly relevant with the 2026 championship approaching its conclusion and much of the grid already concentrating on next year’s cars.
For Ferrari, the revised floor board represents another example of adapting the existing SF-26 package to the demands of a particular venue. Reducing drag offers potential benefits along the lengthy straights, but the resulting reduction in downforce must also be considered when assessing the overall aerodynamic compromise.
That balance is one of the central technical questions facing the Scuderia, alongside Ferrari’s potential tyre warm-up difficulties in the cold Las Vegas conditions.
With 13 declared changes spread across seven teams, the Las Vegas Grand Prix demonstrates how circuit-specific technical adjustments remain important even when development resources are increasingly directed towards the following Formula 1 season.






Leave a Reply